Hydrorelax Logo

The Buyer’s Manual of Hot Tub Spa Covers

The Buyer's Manual of Hot Tub Spa Covers (3)

Introduction

If you have a hot tub or spa, you are aware of how crucial having a proper cover is. Your spa is shielded from weather elements, filth, debris, insects, and other pests by a hot tub cover. Additionally, it aids in maintaining the quality and temperature of the water, saving you time and money.

However, how do you pick the ideal hot tub cover? What aspects must to be taken into account while purchasing a new or replacement cover? And how do you maintain your cover to extend its life?

All of these queries and more will be addressed in this post. We’ll provide you a thorough tutorial on how to choose and care for a hot tub spa covers that matches your requirements and price range.

What is a Hot Tub Spa Cover?

A huge piece of cloth or vinyl that covers the top of your hot tub or spa is called a hot tub or spa cover. It often has a foam core that offers stability and insulation. Additionally, it could contain handles, straps, locks, skirts, and vents.

A hot tub spa cover has several functions:

  • It keeps the water warm and uses less energy by stopping heat loss from the water.
  • It keeps the water level and balance by preventing evaporation of chemicals and water.
  • It keeps the water clean and hygienic by preventing the entry of dirt, debris, insects, and other impurities.
  • It improves safety and security by preventing unintentional access by youngsters, animals, or unauthorised users.

 

Why Do You Need a Hot Tub Spa Covers?

Any hot tub or spa owner needs a hot tub cover in addition to being a lovely accessory. Your hot tub or spa will be vulnerable to a number of dangers and issues if it doesn’t have a cover:

  • Heat loss: Your hot tub or spa will lose heat quickly without a cover, especially in cold weather. The water will get colder and less inviting as a result. Your energy costs will also go up since you’ll have to use the heater more frequently to keep the room at the right temperature.
  • Evaporation: Your hot tub or spa will lose water and chemicals through evaporation in the absence of a cover. As a result, the water level will drop and the chemical balance will change. To maintain the best possible water quality, you will need to add more water and chemicals more regularly.
  • Contamination: Without a cover, dirt, debris, insects, and other pollutants that can enter the water will be able to get into your hot tub or spa. The result will be muddy, unclean water. Additionally, it can result in filter and jet blockage, which would impair the functionality of your hot tub or spa.
  • Safety: Without a hot tub spa cover, anyone who wants to use your hot tub or spa can do so. This may apply to kids, animals, or strangers who might not be familiar with the safety guidelines or measures. Accidents, injuries, or damage to your hot tub or spa may result from this.

How Should I Pick a Hot Tub Cover??

Picking a hot tub spa cover that meets your needs and budget is not the only criteria to consider. Before purchasing a new or replacement cover for your hot tub or spa, you need to take into account a number of variables.

Shape and Size

You must precisely measure your hot tub or spa before you do anything else. Get a cover that fits tightly, without gaps or overlaps, over the top of your hot tub or spa.

Take the measures of the outside border from one side to the other to determine the size of your hot tub or spa. If your hot tub or spa has any curves or corners, you should additionally measure their radiuses.

To choose the ideal form and size cover for your hot tub or spa, utilize our online tool. Simply enter your measurements and choose from our selection of shapes and sizes.

Color

The next step is to decide on the color of your cover. You could choose to coordinate the color of your cover with the acrylic or hot tub cabinet. Alternately, you could wish to go with a striking contrast hue.

For our coverings, we provide 11 distinct color choices. Classic hues like black, brown, gray, tan, or white are options. Alternately, you might use bolder hues like blue, green, red, purple, or yellow.

Our covers are constructed of marine quality vinyl that has been UV stabilized so they won’t fade or fracture. Your cover will continue to look excellent for many years, you can be sure of that.

 

Insulation

The degree of insulation a cover offers should be your first priority when making your decision. The thickness and density of the foam core are two factors that affect a cover’s ability to insulate.

The taper serves as a gauge for the foam core’s thickness. The difference in thickness between the cover’s center and edge is known as the taper. A thicker cover, which can hold more weight and trap more heat, results from a thicker taper.

The weight per cubic foot is used to calculate the foam core’s density. A thicker, more durable cover that can withstand drooping and water absorption has a greater density.

The R-value also indicates how well insulated a cover is. How strongly a substance resists heat flow is determined by its R-value. A better insulating cover with a higher R-value will keep the water warmer while using less energy.

Your location and intended use will determine the amount of insulation you need for your cover. Get a thicker, denser cover that can resist inclement weather and heavy snow if you live in a cold area and use your hot tub or spa all year long. You could be good with a thinner, lighter cover that can still maintain the water’s warmth and cleanliness if you reside in a warm region or just use your hot tub or spa occasionally. Hydrorelax is a professional manufacturer & supplier of spa cover and lifter.

For our coverings, we provide six different degrees of insulation. Among the options are:

  • Economy: 4″ to 2″ taper, 1.0 lb density, R-value 12, suited for temperate temperatures or indoor spas, 1-year warranty
  • Standard: 1.5 lb density, R-value 13, suitable for mild temperatures, 3-year guarantee, 4″ to 2″ taper.
  • Deluxe: suited for moderate seasonal conditions, 4″ to 2″ taper, 2.0 lb density, and R-value 14.3; 3-year warranty
  • Energy-saving: 5″ to 3″ taper, 1.5 lb density, R-value 19.5, suitable for use all year round in cold areas, 4-year guarantee
  • Ultra: 5″ to 3″ taper, 2.0 lb density, R-value 21, excellent for usage all year round in cold areas, 4-year guarantee
  • Supreme: excellent for usage all year round or in extremely cold areas, 6″ to 4″ taper, 2.0 lb density, 5-year warranty.                                 +

Features

The features that a cover offers should be your final priority when selecting one. On all of our covers, some elements are required, while others are additional or optional. Some of the standard features on our covers are:

  • Skirt: A vinyl flap known as a “skirt” drapes downward from the cover’s edge. It assists in caulking the opening between the hot tub lid and cabinet, reducing heat loss and dirt entrance.
  • Handles: The handles, which are strengthened straps attached to the sides of the cover, make it simple and safe to raise and remove the cover.
  • Straps: Attached to the corners of the cover, straps are movable buckles. They assist you in securing the hot tub cabinet’s cover so that wind lift and unwanted entry are prevented.
  • Vents: Close to the cover’s hinge, there are a few tiny apertures called vents. They aid in letting go of the pressure and extra moisture that has built up inside the cover, preventing mold damage and development.

Several of the extra or optional elements on our covers include:

  • Metal clips that are fastened to the straps are called locks. They assist you in securing the hot tub cabinet cover with a key to increase security and safety.
  • A foam wedge known as a “steam stopper” is positioned along the cover’s hinge. It aids in sealing the opening between the cover’s two sections, limiting heat loss and steam leakage.
  • The bottom of the lid is covered with a sheet of aluminum foil to act as a reflective shield. It aids in re-radiating heat into the water, improving insulation and effectiveness.
  • A reinforced hinge is a cover hinge that has an additional layer of vinyl attached to it. It aids in fortifying the hinge and guards against ripping or breaking

 

How to Maintain a Hot Tub Spa Cover?

You must take proper care of your hot tub spa cover once you’ve selected and purchased it if you want it to last longer and function more effectively. Here are some pointers for caring for your hot tub cover:

  • Use mild soap and water to routinely wash your cover. Avoid using abrasive cleansers or strong chemicals that can harm the foam or vinyl.
  • After cleaning, properly rinse your cover with fresh water. With a soft cloth or towel, dry it off.
  • To shield your cover from UV rays, grime, and stains, use a vinyl protector or conditioner once every three months.
  • When utilizing your hot tub or spa, entirely remove your cover. Avoid folding or rolling your cover since doing so might harm the foam core.
  • When not in use, keep your cover in a dry, shaded location. To prevent sagging or breaking, avoid placing any heavy objects on your cover.
  • Regularly check your cover for indications of wear and tear. Utilize vinyl patches to patch up any tiny rips or holes. 

Conclusion

Any owner of a hot tub or spa should have a hot tub covers on hand. It aids in defending your hot tub or spa from heat loss, contamination, evaporation, and security risks. It also helps to enhance the appearance and value of your hot tub or spa.

You must pick a cover that is the right size and form for your hot tub or spa, matches your preferred color, provides the necessary insulation, and has the amenities you desire.

We hope that our tutorial has made it easier for you to comprehend the fundamentals of purchasing and caring for a hot tub spa cover. Please don’t hesitate to get in touch with us if you need anything or if you have any questions or concerns.

 

FAQ

Get your answer and inquiry about hot tub spa covers.

Q: How much does a hot tub spa covers cost?

A: The cost of a hot tub spa cover depends on several factors, such as the shape, size, insulation level, and features of the cover. Generally, the cost ranges from $200 to $600.

Q: How long does a hot tub spa covers last?

A: The lifespan of a hot tub spa cover depends on several factors, such as the quality, usage, maintenance, and environment of the cover. Generally, a cover lasts from 3 to 7 years.

Q: How do I measure my hot tub or spa for a new cover?

A: To measure your hot tub or spa for a new cover, you need to take the dimensions of the outer edge from one side to another. You also need to measure the radius of any curves or corners if your hot tub or spa has an irregular shape. You can use our online tool to find the right shape and size of cover for your hot tub or spa.

Q: How do I install my new hot tub spa covers?

A: To install your new hot tub spa cover, you need to follow these steps:

  • Remove your old cover and dispose of it properly.
  • Unpack your new cover and inspect it for any damage or defects.
  • Place your new cover on top of your hot tub or spa and align it with the edges.
  • Adjust the straps and locks to secure the cover to the hot tub cabinet.
  • Enjoy your new cover!

Q: How do I clean my hot tub spa cover?

A: To clean your hot tub spa cover, you need to follow these steps:

  • Remove your cover from your hot tub or spa and place it on a flat surface.
  • Spray your cover with mild soap and water using a hose or a spray bottle.
  • Scrub your cover gently with a soft brush or sponge.
  • Rinse your cover thoroughly with clean water using a hose or a spray bottle.
  • Wipe your cover dry with a soft cloth or towel.
  • Apply a vinyl protector or conditioner once every three months to protect your cover from UV rays, dirt, and stains.

Q: How do I store my hot tub spa cover when not in use?

A: To store your hot tub spa cover when not in use, you need to follow these steps:

  • Remove your cover from your hot tub or spa and place it on a flat surface.
  • Wipe your cover dry with a soft cloth or towel.
  • Store your cover in a dry and shaded place when not in use.
  • Do not place anything heavy on top of your cover as this can cause sagging or cracking.

Share This Post

Explore More

Send Your Inquiry Now

Frequently Asked Questions

We have professional team of workers, service and inspection, and we have own sub factories.

Sure, we can send the samples for free, but customer should pay the freight cost. It will cost some sample charge for custom designs, but it is refundable when order is up to certain quantity.

Usually you should pay 30% deposit before production, the balance paid before shipping. For the small order, you need to pay the whole payment before production.

Yes. All of our products can be packed as your requirement.

7-15 days if in stock.

Different products has different price, although the same product which use different fabric and workmanship will have different price, as suppliers, we promise to provide the best pre-sales and after-sales service for the customers!